Olife Energy Wallbox AC 22kW – BASE, twisted cable Type 2, length 4 m
35 100,- Kč without VAT Wallbox with Smartmeter + Installation and connection of WallBox 6 750,- Kč without VATThe OlifeEnergy WallBox BASE is a Type 2 twisted cable charging station designed for charging all types of electric vehicles on the EU market with alternating current (AC). It charges up to 22 kW. Thanks to the IP54 protection rating, it is durable and suitable for outdoor use and indoor installation, e.g. garages. It can be mounted on a wall (wallbox) or on a profile that is anchored into the ground (pole mount).
The total power consumption of the station can be dynamically regulated using the external OlifeEnergy SmartMeter BASE module. The SmartMeter is a device that ensures optimal use of the electrical connection capacity by measuring the current consumption of the Wallbox or its sub-circuit and evaluating the available power for the OlifeEnergy charging station. The station then regulates the charging current according to the available power.
This WallBox is equipped with a socket and a twisted Type 2 (Mennekes) cable with a length of 4 m.
The input power cable must be prewired with a type B circuit breaker, with max. 32 A and a type A current protector with a minimum nominal rated current of 40 A.
Specifications of Wallbox BASE:
- Output type: Type 2
- Output power: 0-22 kW
- Control: local automatic switching or by RFID card (RFID chip)
- Residual protection: residual DC current detection according to IEC 62955
- Max. Output current: 0-32 A
- Input voltage: 3×400 V
- IP protection: IP54
- Operating temperature: from 25°C to 40°C
- Operating humidity: 5% to 95%
- Weight: 10 kg
- Dimension: 266 × 320 × 120 mm
- Designation.
The SmartMeter measures the current consumption of the building or its sub-circuit, and evaluates the available power for the OlifeEnergy charging stations. It then controls the charging current according to the available power. It ensures optimum use of the capacity of the electrical connection and thus prevents overloading or network failure. The measurement is performed indirectly by means of measuring transformers with a split core. The measuring unit occupies 5 modules (unit + 1 circuit breaker) in the switchboard, another 5 modules are occupied by the unit for communication with OlifeEnergyCloud, and it is powered from the switchboard by phase voltage 1P + N 230V, in case of power measurement then 3P + N(PEN) 400V / 50Hz. Communication with the station is via serial link using RS485 bus with MODBUS RTU protocol, the bus is galvanically isolated. The RJ45 connector is used for…
Interested in a wallbox? Do not hesitate to contact us.